Metal Roof Flashing: Types, Placement and Common Leak Points
Metal roof flashing protects vulnerable roof areas, including joints, edges and openings, from water penetration. Without proper installation, rainwater can cause leaks, corrosion and structural damage. In Malaysia’s rainy climate, choosing the right flashing and ensuring correct installation are essential for long-term roof protection. This guide covers flashing types, placement, common leak points, installation and pricing.
What Is Roof Flashing?
Metal roof flashing consists of formed metal pieces installed at roof joints, edges and openings to prevent water from entering vulnerable areas. It is one of the key metal roofing components, alongside sheets, purlins and insulation.
Its main functions include:
- Prevent water penetration: Covers gaps and roof connections.
- Direct rainwater: Channels water away from vulnerable areas.
- Protect roof structures: Reduces moisture exposure, corrosion and damage.
- Improve roof durability: Maintains the roofing system’s weather resistance.
Common Types of Metal Roof Flashing
Different flashing types protect specific roof areas from water penetration.
1. Ridge Flashing: First, it covers roof peaks.
2. Valley Flashing: Similarly, channels water between roof slopes.
3. Barge Flashing: In addition, it protects sloping roof edges.
4. Eave Flashing: Also directs water towards gutters.
5. Apron Flashing: Meanwhile, it seals roof-to-wall connections.
6. Step Flashing: Likewise, it protects sloping wall intersections.
7. Pipe Flashing: Finally, it seals around roof pipes and vents.
Flashing Materials
Roof flashing materials affect durability, corrosion resistance and maintenance.
1. Galvanised Steel: Affordable because of its zinc-based rust protection.
2. Aluminium: Lightweight as well as corrosion-resistant.
3. Aluminium-Zinc Coated Steel: Such as ZINCALUME® steel, offering better corrosion resistance than standard galvanised steel.
4. Pre-Painted Coated Steel: Offers durability, weather resistance and colour options, such as COLORBOND® steel.
Where Should Metal Roof Flashing Be Installed?
Flashing is needed at roof joints and openings where water may enter.
1. Roof Ridges: For example, where two roof slopes meet.
2. Roof Valleys: Where rainwater collects and flows.
3. Roof Edges: In particular, along eaves and gable ends.
4. Wall Intersections: Similarly, where roofs meet walls.
5. Roof Penetrations: Such as around pipes, vents and skylights.
Valley and gutter sizing should also follow a roof drainage calculation, especially on large roofs.

Common Metal Roof Flashing Leak Points
Metal roof leaks often occur at flashing connections due to poor installation, damaged seals or loose fasteners.
Common leak points include:
1. Roof Valleys: For example, debris buildup or damaged flashing affects water drainage.
2. Ridge Connections: Similarly, loose or poorly overlapped flashing allows water entry.
3. Roof-to-Wall Joints: Likewise, incorrect flashing installation creates gaps.
4. Pipe Penetrations: In addition, cracked seals allow rainwater to seep through.
5. Roof Edges: Also, damaged flashing exposes the roof structure.
6. Fastener Holes: Finally, loose screws and worn washers create water entry points.
Why Does Flashing Fail?
Flashing can deteriorate over time due to several factors:
1. Poor Installation: For instance, incorrect overlaps, gaps or loose fasteners.
2. Weather Exposure: Heavy rain, heat and UV exposure damage coatings and sealants.
3. Thermal Expansion: Temperature changes cause metal to expand and contract, which in turn loosens joints.
4. Corrosion: Similarly, damaged coatings increase the risk of rust.
5. Ageing Sealants: Finally, hardened or cracked sealants allow water penetration.
Metal Roof Flashing Installation and Replacement Pricing in Malaysia
Flashing costs depend on material, dimensions, roof accessibility and labour requirements.
Estimated pricing in Malaysia:
- Flashing Material: RM8–RM20 per metre.
- Installation: RM65–RM120 per metre.
- Minor Repairs: RM300–RM1,500 per job.
- Complex Flashing or Valley Repairs: RM800–RM3,000 per job.
Metal Roof Flashing Maintenance Tips for Malaysian Homes
Regular maintenance helps prevent roof leaks and extend flashing lifespan.
1. Inspect Twice a Year: Check for damage before and after rainy seasons.
2. Clear Debris: Then remove leaves and dirt from roof valleys.
3. Check Sealants: Also look for cracks or peeling around joints.
4. Inspect Fasteners: Then replace loose screws and worn washers.
5. Check for Corrosion: In addition, look for rust and damaged coatings.
6. Arrange Professional Inspections: Finally, repair damaged flashing promptly.

Frequently Asked Questions (FAQs)
Q: Can flashing be added to an existing metal roof?
A: Yes. Flashing can usually be added or replaced on an existing metal roof, as long as the sheets and fixings around it are still in good condition.
Q: Should flashing go over or under metal roofing?
A: It depends on the location. As a rule, each piece should overlap the material below it, so water runs over the joint rather than into it.
Q: What sealant is suitable for roof flashing?
A: Use a roofing-grade sealant that’s compatible with the flashing metal and coating, such as a neutral-cure silicone. Also avoid relying on sealant alone to keep water out.
Q: Can damaged flashing be repaired?
A: Yes. However, severely damaged flashing should be replaced.
Q: Does roof flashing need to match the roof colour?
A: No. However, matching colours create a consistent appearance.
Why Choose Lavenda Building Systems?
With over 20 years of experience in Malaysia’s lightweight steel truss, metal roofing and walling industry, Lavenda Building Systems prioritises quality and material reliability.
Our key strengths include:
1. Trusted Materials: We source coated steel from BlueScope, a globally recognised manufacturer.
2. Proven Durability: COLORBOND® steel undergoes rigorous testing for reliable performance in demanding conditions.
3. Material Assurance: Carefully selected materials help protect your roofing investment.
Proper flashing helps prevent water leaks at roof joints, edges and openings. Choosing the right materials and ensuring proper installation and maintenance improve roof durability, especially in Malaysia’s rainy climate.
Contact Lavenda Building Systems for professional advice on roofing materials, components and installation solutions. Get in touch with our team today to discuss your roofing requirements.



Leave a Reply